Centrifugal dewatering machine for continuous and batch dewatering in food and chemical plants in Vietnam

Source:

Author:

Hui Bo

Release time:

2026.11.18


A centrifugal dewatering machine earns its place in Vietnam wherever a wet crystalline or granular cake has to leave the process drier than a filter or a settling tank can manage: washed tapioca starch heading for the flash dryer, fertiliser crystals, fine-chemical intermediates, aquatic-product by-products that go through a wash step first. The word "dewatering" hides a real fork in the road, though. Some plants need a machine that runs for days without stopping; others need a machine that processes one clean batch, stops, and hands the next batch a clean cloth. Picking the wrong side of that fork is the most common reason a new line in Vietnam ends up with a wet cake and an unhappy shift supervisor.

This article is about that fork. It compares continuous, batch and semi-continuous filtering centrifuges (pusher, screw-filter, peeler or scraper, flat-type and shake-bag machines), explains what really sets residual moisture and cake washing results, and looks at the food-grade and batch-changeover questions that come up in Vietnamese food and fine-chemical plants. The physics of settling versus filtering and the separation factor are covered in the series article on the centrifugal separator and centrifugal filter, so they are not repeated here.

centrifugal dewatering

What a centrifugal dewatering machine means in a Vietnam plant

On a purchase enquiry from a Vietnamese plant, "centrifugal dewatering machine" is used for filtering baskets, for solid-bowl machines and, now and then, for no particular machine at all, only a wish for a drier product out of an existing wash step. This article covers the filtering family: the basket wall is perforated and carries a screen or filter cloth, the cake forms on the medium, and a pusher, scraper blade, screw, lifted bag or shaken bag takes it out. Solid-bowl machines are in the decanter centrifuge guide, and wastewater sludge has its own article on sludge dewatering.

Continuous, batch and semi-continuous centrifuges: how the operating modes differ

The three terms are used loosely in sales literature, so it is worth pinning them down by what the machine actually does with the cake.

Continuous machines

Feed goes in, filtrate comes out and cake leaves the basket without the basket ever stopping or slowing. In a pusher centrifuge a reciprocating piston plate shoves the cake ring forward a few centimetres per stroke, so the cake migrates along the screen and falls off the end. A screw-discharge filter machine does the same with a helical conveyor. Output is steady, the downstream dryer or conveyor sees a regular flow, and the cake is of uniform thickness. The trade-off for that regularity is that the product must be free-draining, fairly coarse and fairly uniform; a pusher does not forgive sticky or very fine feed.

Batch machines

A batch centrifuge runs a fixed cycle: accelerate, fill, spin off, wash, spin dry, discharge. Peelers, scrapers, flat-type machines with a lifted bag and top-load manual baskets belong here. They accept feeds a pusher would choke on, including low-solids suspensions and fine crystals, and allow thorough, repeatable washing. Throughput is limited by cycle time.

Semi-continuous: what the phrase really covers

A "semi-continuous centrifuge" is the label for a hybrid. The basket runs for the whole production day while feed, wash, spin dry and scrape follow in an automatic sequence. The manufacturer's product page describes its siphon scraper machine this way, as automatic control with continuous operation and intermittent discharge: the rotor never stops, but cake leaves in portions. That removes the acceleration and braking time of a stop-start machine.

ModeTypical machinesCake leaves the basketWorks best whenWatch for
ContinuousPM, HY/WH, HR, HS pusher; LWL screw filterSteady stream, basket never stopsFree-draining crystals or granules, stable feed, long production runsFines that blind the screen, crystal breakage, flooding when the feed concentration drops
Semi-continuousGK, GKH scraper at full or variable speedIn portions, rotor keeps turningLarge batch volumes, demanding wash, fine or slow-draining crystalsCycle-time creep, cloth wear, scraper clearance
Batch (stop and lift)Flat-type with lifted bag, manual basketBag or cake removed after the machine stopsSmall lots, frequent product changes, low capital complexityOperator exposure, cycle time dominated by handling
Batch with clean-offLGZD shake-bag scraperScraped, then residual cake shaken off the bagStrict cross-batch purity, food or fine-chemical useBag fatigue, vibration settings

Perforated basket vs non-perforated basket centrifuge

A perforated basket centrifuge has holes in the basket wall under a cloth or woven wire screen; moisture is set by drainage between particles. A non-perforated (solid-wall) basket holds liquid until it overflows a weir, so the cake keeps more of it. Solid-wall machines suit slurries that cannot form a permeable cake. This article stays with the perforated group.

Hand test at the feed tank: squeeze a handful of the wet material. If liquid runs freely between the fingers, a perforated basket is a safe starting point. If it turns to paste, look at a solid-bowl design or at conditioning the feed before spending any time on basket details.

Pusher centrifuge dewatering: PM, HY/WH, HR and HS machines

The pusher centrifuge is the classic answer when a plant wants continuous dewatering of crystalline material. Slurry enters a rotating feed funnel, accelerates, and spreads as a thin layer on the screen at the start of the basket. A piston plate pushes the formed cake ring forward on each stroke, and then retracts to leave space for new cake. Between strokes the cake lies still for a moment; that rest time, multiplied by the number of stages, determines how much liquid is drained.

Single, two-stage and three-stage designs

A single-stage machine (the HY/WH type uses a hydraulically driven piston with an oil pump and an oil cooler) is compact and works well when the cake dries quickly. A two-stage machine nests a smaller basket in a larger one; the cake turns over at the transfer, which opens drainage channels and helps washing. A three-stage machine adds a further stage for materials that agglomerate or build up, extending the time in the field and lowering final moisture.

Feed conditions that make a pusher behave

  • Feed concentration. Pushers want a thick slurry, since a thin one floods the screen and carries solids into the filtrate. In practice, plants run a thickener, a hydrocyclone or a decanter upstream to get the solids fraction up before the pusher. The listed figure for a two-stage pusher in the section below is 30–80% solids by volume.
  • Particle size. The listed two-stage range is about 0.05–5 mm. Below the bottom of the range, the fines wedge into the screen and moisture climbs; above it, the feed is outside the listed range and needs a trial before it is assumed to work.
  • Stroke frequency and cake thickness. More strokes per minute mean a thinner cake and less residence time per stage; operators trade this against feed rate to find the lowest stable moisture.

What a failing pusher looks like on the shift

A suddenly wetter cake usually means a feed concentration drop or fines building on the screen; check filtrate turbidity before touching the stroke. A hydraulic pusher whose oil temperature creeps up every afternoon needs its cooler and cooling water checked first, particularly in Vietnamese summer heat.

Peeler and scraper centrifuges: batch cycle, siphon and top-suspended machines

A peeler centrifuge, called a scraper centrifuge in most Chinese catalogues, builds a cake on a filter cloth inside a perforated basket, washes and spins it dry, then peels the cake with a blade that moves outward from the axis into the cake. The cake drops through the bottom of the casing, which is why people also speak of a bottom discharge centrifuge. Think of the machine as a very fast, very controlled filter.

The cycle, step by step

  1. Feeding. Slurry is pumped in while the basket turns at a moderate speed, forming a cake against the cloth. The filtrate leaves through the casing.
  2. Spin-off. Feed stops. Liquid retained in the cake drains out.
  3. Washing. Wash liquid is sprayed onto the cake to displace the mother liquor. Wash time, wash volume and number of washes are set in the recipe.
  4. Spinning dry. The speed increases. Surface and capillary moisture are driven off.
  5. Peeling and discharge. The scraper moves into the cake and ploughs it into the discharge chute. Most machines leave a thin layer of cake, called a heel, on the cloth to protect it.

Siphon, flat-type, top-suspended and shake-bag versions

The scraper centrifuge family branches into several variants for different operating conditions. In the siphon (GKH) variant, a siphon tube sits outside the cloth and creates a suction that increases the filtration driving force. It is described on the manufacturer's page for particles roughly 5 µm to 5 mm and 1–40% solids by volume, and for large-load production and occasions that need thorough washing. The flat-type machines have a low centre of gravity; four-point support, liquid damping and a low vibration level mean they can sit without special foundations. The top-suspended version puts the drive above the basket, so the bearings are kept away from the product zone, which helps in corrosive service. The shake-bag version (LGZD) adds a vibrating step that shakes off the residual cake from the filter bag; the product literature states that the residual-cake removal rate can exceed 99% for this feature, intended to prevent cross-mixing between batches.

Heel or no heel? A heel protects the cloth from the scraper but leaves previous-batch material behind. In a plant making one product all year, a heel is harmless. In a plant that changes grades or customers every few shifts, it is a contamination route. That single point is why batch-changeover plants look at shake-bag machines.

How the cake leaves the basket and what that means on the shop floor

Discharge method shapes the daily life of a dewatering machine more than almost any other feature. It fixes who touches the product, how much of the cake is broken on the way out, and how quickly one grade can follow another.

Discharge methodWhat physically happensEffect on the cakeShop-floor consequence
Pusher plateA reciprocating plate shoves the cake ring along the screenSome attrition from repeated pushing; cake stays fairly coarseSteady feed to the dryer; wear at the screen edge near the push end
ScrewA helical conveyor carries the cake along a conical basketGentle on free-flowing grains, harder on brittle crystalsContinuous, but sensitive to feed swings
Peeler bladeA knife moves into the spinning cake and ploughs it out through the bottomBlade can crush crystals and smear soft cakes; a heel stays on the clothShort, repeatable cycles; blade clearance needs checking
Lifted bagThe filter bag is pulled out of the stopped basketCake arrives intact, with no knife contactHandling time and operator exposure dominate the cycle
Shake bagCake is scraped, then the bag is vibrated to release the remainderVery little carry-over to the next batchBag fatigue and vibration settings become the maintenance items

Matching the discharge to product fragility

Large, brittle crystals and discharge speed pull in opposite directions. A pusher that breaks a crystal produces fines, and fines wedge into the screen on the next pass, so moisture rises and the break-up feeds on itself. When the product is sold by crystal size, a plant sometimes accepts a lower throughput or a slower stroke simply to protect the grain. Soft, sticky cakes such as washed starch behave the other way round: a blade smears them across the cloth, so a lifted bag or a shake-bag release is the gentler route.

Balance, vibration and the person at the machine

A batch basket that is fed unevenly runs out of balance, and the vibration trip that follows is one of the most common reasons a cycle is aborted halfway. Operators in a hot Vietnamese hall learn to watch the fill pattern and to slow the feed valve rather than fight the trip. Manual bag lifting adds a second consideration: a damp, warm cake bag is heavy and awkward, and a hoist or an automatic bottom discharge is usually accepted after the first season of lifting by hand.

Cake washing and residual moisture: what sets the final wetness

Liquid in a centrifuged cake sits in three places: free liquid between particles, which drains quickly; capillary liquid in narrow gaps, which drains only under strong field and time; and bound surface moisture, which no centrifuge removes and which must go to a dryer.

FactorEffect on residual moisturePractical lever
Particle size and distributionSmaller particles hold more liquid by capillary action; a wide distribution lets fines fill the gaps between coarse grainsImprove upstream crystallisation or classification; remove fines before the machine
Cake thicknessThicker cake lengthens the drainage path, giving a wet layer near the cloth or screenReduce feed per cycle (batch) or increase stroke frequency (pusher)
Spin or residence timeMoisture falls fast at first, then flattens; extra minutes give littleFind the knee of the curve and stop there
Rotational speedHigher field drives off more capillary liquid, but raises crystal breakageRaise speed only as far as the product tolerates
Liquid viscosity and temperatureViscous mother liquor drains slowly; warm liquor drains fasterRun the feed warm where product stability allows
Filter mediumBlinded or worn cloth increases resistance, leaving the cake wetClean and change cloth on schedule, check mesh against particle size
Wash liquidA wash that is too generous re-wets the cake; one that is too thin leaves impuritiesMatch wash volume to the target purity, then let the cake spin long enough afterwards

Reading the moisture curve in the plant

The most useful habit is simple: record the cake moisture, the spin or stroke setting and the feed condition together, shift after shift. Two weeks of such a log shows which knob actually moves the number. A pusher usually runs wetter for the first minutes after start-up, until the cake ring is established on the screen, so samples taken straight after a start say little. A batch machine tends to show moisture that drifts upward over a week as the cloth ages, then drops back after a cloth change; that pattern is the signal to change the cloth on a schedule instead of waiting for a complaint from the dryer.

How washing works inside the machine

Washing in either machine is displacement washing: clean liquid pushed through the pores ahead of the mother liquor. An even cake washes as a plug; a cracked or channelled cake lets the liquid take the easy path and leaves pockets behind. That is why a peeler operator avoids letting the cake dry and crack before the wash, and why a feed that swings between thick and thin makes wash results unpredictable.

Food-grade dewatering: stainless contact parts, CIP and batch changeover

Buyers of a dewatering centrifuge for food or fine-chemical use in Vietnam ask three things, roughly in this order: what touches the product, how the machine is cleaned, and how one batch is kept from contaminating the next.

Product-contact surfaces

Contact parts are the basket, feed funnel, casing interior, scraper or pusher plate and discharge chute. Stainless steel is standard for food and many chemical tasks. Auditors inspect weld seams, dead corners and seal crevices, because residues hide there and bacteria grow in a warm, humid Vietnamese hall.

Cleaning in place

A CIP-ready machine has spray nozzles reaching the basket, casing and chute, drain points at the lowest positions, and seals that tolerate hot water and detergent. Wet organic cakes such as starch or protein foul the cloth fast, so cleaning intervals are short. The practical question is whether one operator can remove and refit the cloth in reasonable time; a cloth change that takes hours tends to be skipped.

Preventing cross-batch contamination

Three routes exist: the heel left on the cloth, product held in the chute and casing, and wash liquor dripping back from the previous batch. A shake-bag design clears the bag, a short clean-liquid rinse flushes casing and chute, and regulated products get dedicated, identified cloths. None of this removes the need for a written changeover procedure; it makes the procedure shorter and more repeatable.

Dewatering centrifuges in Vietnam: cassava, aquatic by-products, fertiliser and fine chemicals

Vietnam's processing industry is spread across the Mekong Delta, the Central Highlands, the south-eastern industrial belt around Ho Chi Minh City and Dong Nai, and the northern industrial zones around Hanoi and Hai Phong. Each region brings its own dewatering problem, and each is shaped by heat, humidity and the seasonality of the raw material.

Tapioca and cassava products

Cassava starch plants in the southern and central provinces are the obvious example. Centrifuge basket machines dewater washed starch milk into a cake that goes to a flash dryer, which is sized for a moisture range; a swing outside it scorches the starch or leaves it damp. Moisture in the high-thirties percent range is a common order of magnitude after a filtering centrifuge, though the real figure depends on grade, cloth and cycle. Starch washing itself is covered in the decanter centrifuge guide linked above; this article concerns only the filtering step that follows.

Aquatic-product processing

Shrimp, pangasius and other aquatic processing leaves protein- and shell-rich by-product streams. Where such a stream is washed and dewatered as a solid, a perforated-basket machine with a cloth is used. Warm ambient conditions mean organic residue spoils within hours of a stop, so cleanability outranks moisture in the selection.

Fertiliser and salt crystals

Crystalline fertilisers such as ammonium sulphate and potassium salts, and industrial salt, are classical pusher feed. Vietnam's humid air adds a particular problem: hygroscopic crystals pick up moisture on the conveyor between the centrifuge and the dryer or the bagging line. A cake that left the pusher at a good moisture figure can arrive at the dryer visibly wetter. Covered conveyors and a short residence between the centrifuge and the dryer help more than any centrifuge adjustment.

Fine and speciality chemicals

Fine-chemical, pigment and new-energy material plants in the industrial parks of the south and north favour scraper machines for repeatable washing and tight batch records. Where flammable solvents are involved, a closed, nitrogen-inerted, explosion-proof machine is the form to ask for.

A shift-change scenario: running a basket machine in a Vietnam food plant

Consider a mid-sized plant in southern Vietnam that makes a washed food-grade crystalline ingredient in three grades. The night shift ends at six. The scraper centrifuge has run Grade A for most of the night, and the day shift must switch to Grade B before eight.

The first thing the day supervisor reads is the batch log. The last Grade A batch took slightly longer to spin dry than the previous ones, and the cake from that batch was a touch wetter. Two possible causes: a partly blinded cloth, or a change in crystal size from the crystalliser. Before the changeover, the operator pulls the cloth, finds fines packed in the weave, and decides to replace it rather than wash it, because Grade B has a tighter purity limit.

The changeover runs in a fixed order. The basket is emptied of the heel, the casing is rinsed with hot water through the CIP nozzles, the discharge chute is wiped and swabbed, and the new cloth is fitted. The first Grade B batch runs with a longer wash than normal, as a cleaning-in-production step, and its product is held back until the laboratory confirms purity. By eight, the machine is back on production.

Nothing in that story depends on exotic technology: a cloth that can be changed quickly, a casing that rinses all the way to the chute, and a habit of logging the spin-dry time of every batch. The log caught the trend.

Selecting a centrifugal dewatering machine: data to collect and questions to ask

Selection begins with data, not a catalogue. The table lists what a manufacturer's engineer will ask for, and why.

Data itemWhy it matters
Solids concentration in the feed (by weight and by volume)Pushers need thick feed; scraper machines accept thinner suspensions
Particle size distribution, including the fines fractionSets screen or cloth choice and predicts blinding
Required cake moisture and purity after washingFixes wash volume, spin time and number of stages
Production pattern: one product or many, hours per dayDecides between continuous and batch, and whether shake-bag cleanliness is needed
Solvent content or flammabilityTriggers closed, inerted and explosion-protected design

Typical Industry Reference Values — Filtering Centrifuges for Dewatering

Particle size range, pusher machinesRoughly 0.05–5 mm
Feed solids for pushersThick slurry, commonly 30% by volume and above
Particle size range, scraper machinesFiner, down to a few micrometres
Feed solids for scraper machinesDilute to moderate, a few percent up to about 40% by volume
Operating modePusher: continuous; scraper: batch or semi-continuous
Wash methodDisplacement through the cake
Residual moistureDepends on cake permeability and spin time; confirm by test

Once the data is gathered, a test on the real product is the final check, because filtration rate, achievable moisture, wash ratio and cloth behaviour cannot be read from a datasheet. For sludges or sticky slurries, the sludge dewatering article covers a different set of decisions.

Huibo pusher, scraper and screw-filter centrifuges for dewatering in Vietnam

Huibo builds all three filtering routes described above, so a Vietnamese food or chemical plant can pick the discharge method that suits its product instead of fitting the product to one machine.

  • Pusher. The pusher range covers the PM two-stage, HY/WH single-stage hydraulic, HR two-stage and HS three-stage machines. The HR takes material of about 0.05–5 mm at 30–80% solids by volume and washes it inside the machine, a fit for crystalline salt and fertiliser lines. The HS adds a third stage for material that holds liquid or tends to cake, and the hydraulic units carry an oil pump and cooler for the piston drive.
  • Scraper. The scraper range runs the whole cycle automatically (feeding, filtering, washing, spinning dry, scraping and discharge). The GKH siphon machine works from 5 µm to 5 mm at 1–40% solids by volume with backflushing, which suits batch food and fine-chemical production with frequent product changes. The LGZD shake-bag machine is used in pharmaceutical, food, chemical and new-energy plants, and its shaking action is aimed at residual cake and cross-batch contamination.
  • Flat-type and top-suspended machines. The flat machines have a low centre of gravity and damped vibration, so they sit in an ordinary building without a heavy foundation, and the top-suspended version puts the drive above the basket.
  • Screw filter. The LWL, part of the LW range, combines continuous feed, washing, dewatering and screw discharge for salt, sugar and similar granular solids.

To start, send the product, particle size, solids content and the moisture target, and the technical team will recommend pusher, scraper or screw-filter.

Frequently asked questions

When should a perforated basket centrifuge be used instead of a non-perforated one?
Use a perforated basket when the solids can build a permeable cake and the target is a drier or washed product; crystals, granules and washed starch are typical. Use a non-perforated basket for suspensions that blind a filter medium, where liquid is removed by settling rather than drainage. A hand squeeze of the wet material, as described earlier, is a fair first screen for a Vietnam plant: free-running liquid points to perforated, paste to solid-wall.
How does a semi-continuous centrifuge work, in plain terms?
The basket keeps turning for the whole production run, so no time is lost to stopping and starting. An automatic program then feeds slurry, spins off liquid, washes the cake, spins it dry and scrapes it out through the bottom, then repeats. Cake therefore leaves in portions rather than as a steady stream, which is why the machine is neither a true continuous pusher nor a stop-start batch unit. The manufacturer's siphon scraper machine is described in this way. The benefit is high throughput combined with thorough, repeatable washing, which suits large-volume crystal production in Vietnamese chemical plants.
What determines residual moisture in the cake?
Mainly particle size and its distribution, cake thickness, time in the centrifugal field, basket speed, liquid viscosity and temperature, and the condition of the filter medium. Fine particles hold more liquid by capillary action, and a blinded cloth leaves a wet layer. Surface-bound moisture cannot be removed by any centrifuge and must go to a dryer. For tapioca starch in Vietnam, the practical aim is a steady, repeatable moisture for the dryer, not the lowest possible number.
Batch vs continuous: how to decide?
Choose continuous when one free-draining product runs for long periods, the feed is stable and a steady flow to the dryer is wanted. Choose batch or semi-continuous when the plant changes grades often, the feed is fine or variable, washing must be thorough and repeatable, or batch records are required. A Vietnam plant making a single fertiliser grade all year suits a pusher; a fine-chemical plant making several grades in rotation suits a scraper or shake-bag machine. When unsure, a trial on the real feed settles the question faster than argument.
How does cake washing work in a pusher or scraper machine?
Clean liquid is sprayed onto the formed cake and displaces the mother liquor as it moves through the pores. In a pusher the spray falls on a defined wash zone as the cake advances; in a scraper machine a wash step follows spin-off and precedes the final dry spin, with time and volume set in the recipe. An even, crack-free cake washes well, whereas a cracked or channelled cake lets the liquid bypass pockets of mother liquor. Blocked nozzles and uneven feed concentration are the usual causes of poor washing, and a conductivity check of the product shows them quickly.
How can cross-batch contamination be prevented in food or fine-chemical use?
Three routes need attention: residual cake left as a heel on the cloth, product trapped in the casing and discharge chute, and wash liquor dripping back from the previous batch. A shake-bag design removes residual cake from the bag; the manufacturer states that the residual-cake removal rate can exceed 99% for this function. Rinsing through CIP nozzles, dedicated cloths per product, and a written changeover sequence handle the rest. For a Vietnamese plant exporting food-grade or pharmaceutical intermediates, logging the spin-dry time and a purity check on the first batch after changeover provide the records buyers ask for.